How to Play Selected Audio Again and Again in Audacity

Audacity offers many tools which let the user to play all or part of a audio. There are too many recording options.

Contents

1. Controlling Playback and Recording
   • Ship Toolbar
   • Using keyboard shortcuts
   • Adjusting the Playback volume
   • Playing at slower or faster speeds than normal
   • Pinned head Playing and Recording
2. Playback
   • Quick-Play using the Timeline
   • Scrubbing and Seeking
   • MIDI (and Allegro) Playback
3. Recording
   • Overdubbing
   • Timer Recording
   • Sound Activated Recording

Decision-making Playback and Recording

Send Toolbar

The easiest way to control Audacity playback and recording is with Send Toolbar:

Clicking Play plays from the cursor point to the end of the project, or from the kickoff of the selection region to the end of that region.

Play Cut Preview will play audio either side of a selection to preview what deleting the selection will audio like. Hold downward Ctrl (⌘ on Mac) while clicking Play.

Alternatively yous can use the C shortcut to preview the cut. This too causes the Play push button image to change to Play Cut Preview.

Clicking Play when the track is already playing or paused is a quick way to restart playback without start pressing Cease.

Clicking Record or using the R shortcut always begins recording at the terminate of the currently selected track(s).

The alternative Tape New Track action for the Record button is activated by holding Shift while clicking Record. The push changes to display the Record New Track icon. This will starting time recording in a new track at either the current cursor position or at the start of the electric current selection.

Click Intermission, or its shortcut P, to temporarily pause playing or recording without losing your place. Click Pause a second time to resume.

Clicking Stop stops playing or recording immediately, and releases Pause if depressed.

Click Loop, or it's shortcut Fifty to set a loop region. When y'all use it the kickoff time, it'll set your current selection to the loop region. If you press Play with looping enabled, it will loop the current loop region over and over.

Using keyboard shortcuts

When you become more than used to Audacity, it is often easier to use keyboard shortcuts for repetitive actions like playing, pausing and recording. Below is a listing of the equivalent keyboard shortcut for each of the Transport Toolbar buttons, with a clarification of what each push button and its shortcut does.

Button	Shortcut	What it does
Pause	P	Press once to pause playback or recording then one time to resume.
Play or End	Space	Press once to start playback then one time to stop. Starting playback once more starts from its original starting position at the cursor.
Play/Stop and Set Cursor	X	This acts exactly like Space when starting playback, but when used to stop, the cursor or start of the option is fix to the position where playback was stopped.
Play to Selection	B	Plays to or from the current mouse pointer position to or from the start or terminate of the option, depending on the pointer position.
Play Cutting Preview	C	Plays ii seconds of audio before the choice and then i second of audio after the selection - thus simulating what playback would audio similar if the selection was deleted. The times are customizable in Playback Preferences.
Loop on/off	Fifty	Enables looping, in which the loop region will be played over and over upon pressing space.
Play In one case	Shift + Infinite	Plays the looping region only in one case when looping is enabled.
Move to Next Label	Alt + Right	Places the editing cursor or option to correspond with the next characterization and restarts playback from there, without opening the label for editing. After the last label is reached, using the shortcut once again jumps playback to the first label. Non bachelor while recording.
Move to Previous Characterization	Alt + Left	Places the editing cursor or selection to correspond with the previous label and restarts playback from at that place, without opening the label for editing. After the first label is reached, using the shortcut once more jumps playback to the final label. Not available while recording.
Skip to Starting time	Home	Move the cursor to start of project.
Skip to Cease	Terminate	Motility the cursor to end of projection.
Record	R	Record starting from the end of the selected runway(s).
Tape New Runway	Shift + R	Record in a new track starting from the cursor position or first of the selection.

Adjusting the Playback volume

Y'all tin adjust the playback volume using the output level slider in the Mixer Toolbar.

The Playback Meter will show you the overall volume of all of your tracks when mixed together.

Playing at slower or faster speeds than normal

Using the Play button in Play-at-Speed Toolbar plays at a constant speed but slower or faster than normal.

Envelope Tool on the Tools Toolbar, when used in conjunction with a Time Track, allows a speed envelope to be fatigued which tin increment or decrease playback speed over the length of the audio.

Pinned head playing and recording

Y'all tin can change Brazenness to play and record with a stock-still head pinned to a position in the Timeline. In this mode the head remains static and the waveforms volition move as the audio is played or recorded.

This beliefs is controlled by using the push button at the left of the Timeline. By default this shows as a green downwards-pointing triangle (like the play caput). In this fashion, the play caput or record head will move horizontally and the waveform will scroll when necessary, except that if Auto-scroll if head unpinned is unchecked in Tracks Preferences then scrolling will not occur.

Clicking on the green triangle will crusade a context carte du jour to be popped upwards. From that context menu you tin check on Pinned Play Head. This volition cause the push icon to change to a drawing-pin which indicates that the play head or record head is at present pinned to the centre of the Timeline and when playing or recording takes identify the waveform will move continuously nether the fixed head.

Unpinned or pinned head can likewise be selected in .

The default pinned position is the eye of the Timeline, but you lot can alter this by clicking on the pinned head and dragging it along the Timeline while you lot are playing or recording. A double-click on the head will restore it to its default position in the center of the Timeline. You may find that centered is the nigh useful when using playback but for recording, repositioning the head to the right may exist useful.

For details on setting and un-setting pinned play and record caput delight see Pinned Play/Record Caput on the Timeline page.

Playback

For fuller details of how to use playback, including keyboard shortcut commands and how to preview brusk sections, delight see the Playback page.

Quick-Play using the Timeline

Timeline Quick-Play provides a quick and convenient ways to either start playback from whatsoever point within the current project or to playback a region of sound.

For details run into the Quick-Play department on the Timeline page.

Scrubbing and Seeking

Scrubbing or Seeking is the action of moving the mouse arrow right or left so every bit to arrange the position, speed or direction of playback - a convenient manner to quickly navigate the waveform to find a particular event of interest.

Scrubbing or Seeking in Brazenness is initiated by using the Scrub button or Seek push button in Scrub Toolbar . Alternatively you can use the menu item and select or from the cascading menu.

Brazenness volition remain in scrubbing/seeking mode until you render it to normal play mode. Clicking the Stop push (or its shortcut Infinite) at whatever time will stop scrub/seek play and return y'all to normal play mode moving the cursor to the electric current scrub/seek play position. If you wish to stop scrubbing or seeking without losing the position of the editing cursor or pick, use the Escape Esc key.

Please see Scrubbing and Seeking for details

MIDI (and Allegro) Playback

MIDI (and Allegro .gro) files tin be imported into Audacity with to a Annotation Track.

Audacity can now play these MIDI (and Allegro) files, but notation that there will no use of the Playback meter while Annotation tracks are played. Although Notation track playback should merely piece of work on Windows, on Mac and Linux additional software may be required.

Editing these Note tracks is possible, simply very limited.

For more details please see: Notation Tracks.

Recording

For fuller details of how to apply recording, including how to control where and which track you lot record in and keyboard shortcut commands, please come across the Recording folio.

When you lot click the Record push button on Transport Toolbar, or use the R, Brazenness will record at the end of the currently selected (or simply) track, or create a new track if you take an empty projection.

When recording like this, at the finish of an existing recording, Audacity will place a Clip line at the junction between the two recordings to aid y'all in separating them later if required. Meet the Recording folio for details.

When making recordings, particular critical recordings, you should consider shutting downwards all other applications giving Audacity sole utilise of the calculator. This tin can assistance to avert skips, small dropouts, and ticks in your recordings. And on Mac that means fully Quitting them not but closing them, as otherwise Mac will leave them open consuming computer resource.

Overdubbing

Yous tin record a new runway while listening to previously recorded tracks. This is called overdubbing. To fix for overdubbing, make sure that is enabled (on) which is its default setting. See the tutorial ready Recording Multi-track Overdubs for more than help with overdubbing.

Before overdubbing it is recommended to perform a latency test to determine the optimum latency correction, then set the value of Latency correction in Devices Preferences. When recording to a new track begins, latency correction is practical to align the new track with the previous tracks(s).

If you lot concur the Shift button downwards the Record button in Transport Toolbar will temporarily change to . Then clicking on this modified Record button, or using the shortcut Shift + R will crusade Brazenness to create a new runway and brainstorm recording on that track from the current cursor position (or from the left edge of a region on the Timeline).

If there is a region in the Timeline, that region will be recorded in a new track.

Timer Recording

Yet another way to record is using the Timer Record utility, found in the Ship Carte.

Utilize it to start recording later, or to record for a certain duration before stopping.

Sound Activated Recording

If you lot turn on you tin make recording pause until the input level exceeds the specified threshold level at .

Links

>  Quick-Play

>  Scrubbing and Seeking

>  Timer Recording

>  Punch and Gyre Recording

paulsiver1982.blogspot.com

Source: https://manual.audacityteam.org/man/playing_and_recording.html